The nexus across water,energy and food (WEF): Learning from research,building on evidence,strengthening practice

While water-energy-food (WEF) Nexus is one of the most important, and widely investigated, environmental topics of our time, previous stock taking efforts possess notable limitations, namely (i) their focus is restricted to research articles, and (ii) there is less focus on nexus permutations that begin with energy and food. This paper assembled more than 900 documents and systematically categorized them according to more than 10 key parameters (e.g. scale, methods, limitations), to characterize approaches, achieved outcomes and presence of variables likely to support on-the-ground change. Our results reveal that WEF Nexus activities are often driven by the water sector, undertaken at global and national scale and authored by experts from diverse backgrounds. Among the utilized methods, modelling and review (i.e. systematic) are the most common. While climate change and governance are routinely considered in WEF Nexus documents, gender, stakeholders and capacity are not. These findings highlight areas for improvement in the design of WEF Nexus initiatives.     

Incorporating stakeholder decision support needs into an integrated regional Earth system model

A new modeling effort exploring the opportunities, constraints, and interactions between mitigation and adaptation at regional scale is utilizing stakeholder engagement in an innovative approach to guide model development and demonstration, including uncertainty characterization, to effectively inform regional decision making. This project, the integrated Regional Earth System Model (iRESM), employs structured stakeholder interactions and literature reviews to identify the most relevant adaptation and mitigation alternatives and decision criteria for each regional application of the framework. The information is used to identify important model capabilities and to provide a focus for numerical experiments. This paper presents the stakeholder research results from the first iRESM pilot region. The pilot region includes the Great Lakes Basin in the Midwest portion of the United States as well as other contiguous states. This geographic area (14 states in total) permits cohesive modeling of hydrologic systems while also providing strong gradients in climate, demography, land cover/land use, and energy supply and demand. The results from the stakeholder research indicate that, for this region, iRESM should prioritize addressing adaptation alternatives in the water resources, urban infrastructure, and agriculture sectors, including water conservation, expanded water quality monitoring, altered reservoir releases, lowered water intakes, urban infrastructure upgrades, increased electric power reserves in urban areas, and land use management/crop selection changes. For mitigation in this region, the stakeholder research implies that iRESM should focus on policies affecting the penetration of renewable energy technologies, and the costs and effectiveness of energy efficiency, bioenergy production, wind energy, and carbon capture and sequestration.     

Opportunities to reduce greenhouse gas emissions from households in Nigeria

Efforts to mitigate climate threats should not exclude the household as the household is a major driver of greenhouse gas (GHG) emissions through its consumption patterns. This paper derives an emission index that could be used to estimate inventories of carbon dioxide (CO₂) emissions from kerosene combustion for lighting in Nigeria and also looks at the implications of solar pv lighting replacing kerosene lamp in Nigeria. Findings indicate that (1) average CO₂ emissions from kerosene combustion for lighting in Nigeria is about 0.06 kg per hour per lamp, which can be taken as the kerosene lamp CO₂ emission index for Nigeria. (2) about 3 × 10W_p solar pv will be required to replace a kerosene lamp, while about 0.124 tonnes of CO₂ will be avoided per lamp per year, operating at 6 h daily. At the national level, under the kerosene lamp replacement projection assumptions made, between 0.4 and 1.0 million tonnes of CO₂ will be avoided per year. The household investment required to owe a solar pv, including the capital cost of switching from kerosene lamp, is about US356, while the national capital investment outlay is between 1,138.265 and US356, while the national capital investment outlay is between 1,138.265 and US2,848 million. (3) Certified Emission Reduction (CER) units, assuming CO₂ is traded, will generate significant annual revenues on the order of 6.96 to almost US17.4 million per year, while earnings from unspent household kerosene fuel could amount to between 2,520 and US17.4 million per year, while earnings from unspent household kerosene fuel could amount to between 2,520 and US6,300 million over the life span of the solar pv. The micro-economic assessment carried out indicates the non-attractiveness of solar pv use at the household level, and (4) to promote solar pv use, both long and short term policy measures that aim at cost reduction were suggested. The paper concludes that, factoring the suggested measures into the climate, energy, and financial policy decision discourse in Nigeria could empower the households to play a significant role in achieving global CO₂ emission reduction, but at the local level.     

Greenhouse gas mitigation and offset options for suckler cow farms: an economic comparison for the Swiss case

We assessed the economic suitability of 4 greenhouse gas (GHG) mitigation options and one GHG offset option for an improvement of the GHG balance of a representative Swiss suckler cow farm housing 35 Livestock units and cultivating 25 ha grassland. GHG emissions per kilogram meat in the economic optimum differ between the production systems and range from 18 to 21.9 kg CO₂-eq./kg meat. Only GHG offset by agroforestry systems showed the potential to significantly reduce these emissions. Depending on the production system agroforestry systems could reduce net GHG emissions by 66% to 7.3 kg CO₂-eq./kg meat in the most intensive system and by 100% in the most extensive system. In this calculation a carbon sequestration rate of 8 t CO₂/ha/year was assumed. The potential of a combination of the addition of lipids to the diet, a cover of the slurry tank and the application of nitrification inhibitors only had the potential to reduce GHG emissions by 12% thereby marginal abatement costs are increasing much faster than for agroforestry systems. A reduction of the GHG emissions to 7.5 kg CO₂-eq./kg meat—possible with agroforestry only—raised costs between 0.03 CHF/kg meat and 0.38 CHF/kg meat depending on the production system and the state of the system before the reduction. If GHG emissions were reduced maximally average costs ranged between 0.37 CHF/kg meat, if agroforestry had the potential to reduce net GHG emissions to 0 kg CO₂-eq., to 1.17 CHF/kg meat if also other options had to be applied.     

Dimensional analysis and scaling in mechanical mixing for fabrication of metal matrix nanocomposites

For a successful enhancement of mechanical properties of metal matrix nanocomposites, a homogeneous nanoparticle dispersion and distribution in the solidified metal is required. Mechanical mixing can be used for initial break-up of agglomerates, and its study can be simplified with dimensional analysis. Using this technique, mixing time and vortex height were assessed while varying fluid properties, impeller angle, and angular speed. Three relevant dimensionless numbers were recognized: the Reynolds (Re), Froude and Galilei (Ga) numbers. Based on blade and impeller shaft angles, a modified Froude number (Fr*) was defined. These parameters were calculated experimentally, varying angular speed from 200 to 1000 rpm for three different impeller angles: 0°, 15° and 30°. This procedure was performed with three fluids: water, and two aqueous glycerin solutions (25% and 50% by volume). Digital images were taken and processed to measure vortex height. Mixing time was measured for water at 0° impeller angle, angular speed ranging from 200 to 1200 rpm. Results showed an optimal dimensionless mixing time with respect to Re. A linear relationship was found between dimensionless vortex height and Fr*. The first had a second order polynomial relationship with the product ReFr*, regardless of impeller angle. This relationship, together with the Ga, specific for each fluid, allows scaling the results to other fluids such as molten pure aluminum. This study allows experimenting in simpler systems that involve transparent fluids, room temperature and low cost, to then elaborate a prediction of vortex height in fluids where measurements are difficult and costly, such as molten metals.     

Analysis of machined surface quality in a single-pass of ball-end milling on Inconel 718

The ball-end milling process is widely used for generating three-dimensional sculptured surfaces with definite curvature. In such cases, variation of surface properties along the machined surface curvatures is not well understood. Therefore, this paper reports the effect of machining parameters on the quality of surface obtained in a single-pass of a ball-end milling cutter with varying chip cross-sectional area. This situation is analogous to generation of free form cavities, pockets, and round fillets on mould surfaces. The machined surfaces show formation of distinct bands as a function of instantaneous machining parameters along the periphery of cutting tool edge, chip compression and instantaneous shear angle. A distinct variation is also observed in the measured values of surface roughness and micro-hardness in these regions. The maximum surface roughness is observed near the tool tip region on the machined surface. The minimum surface roughness is obtained in the stable cutting zone and it increases towards the periphery of the cutter. Similar segmentation was observed on the deformed chips, which could be correlated with the width of bands on the machined surfaces. The sub-surface quality analysis in terms of micro-hardness helped define machining affected zone (MAZ). The parametric effects on the machining induced shear and residual stresses have also been evaluated.     

Geographic variation in resource allocation to the abdomen in geometrid moths

A resource allocation trade-off is expected when resources from a common pool are allocated to two or more traits. In holometabolous insects, resource allocation to different functions during metamorphosis relies completely on larval-derived resources. At adult eclosion, resource allocation to the abdomen at the expense of other body parts can be seen as a rough estimate of resource allocation to reproduction. Theory suggests geographic variation in resource allocation to the abdomen, but there are currently no empirical data on it. We measured resource allocation to the abdomen at adult eclosion in four geometrid moths along a latitudinal gradient. Resource (total dry material, carbon, nitrogen) allocation to the abdomen showed positive allometry with body size. We found geographic variation in resource allocation to the abdomen in each species, and this variation was independent of allometry in three species. Geographic variation in resource allocation to the abdomen was complex. Resource allocation to the abdomen was relatively high in partially bivoltine populations in two species, which fits theoretical predictions, but the overall support for theory is weak. This study indicates that the geographic variation in resource allocation to the abdomen is not an allometric consequence of geographic variation in resource acquisition (i.e., body size). Thus, there is a component of resource allocation that can evolve independently of resource acquisition. Our results also suggest that there may be intraspecific variation in the degree of capital versus income breeding.     

Characterization of maspardin, responsible for human Mast syndrome, in an insect species and analysis of its evolution in metazoans

Mast syndrome is a complicated form of human hereditary spastic paraplegias, caused by a mutation in the gene acid cluster protein 33, which encodes a protein designated as “maspardin.” Maspardin presents similarity to the α/β-hydrolase superfamily, but might lack enzymatic activity and rather be involved in protein–protein interactions. Association with the vesicles of the endosomal network also suggested that maspardin may be involved in the sorting and/or trafficking of molecules in the endosomal pathway, a crucial process for maintenance of neuron health. Despite a high conservation in living organisms, studies of maspardin in other animal species than mammals were lacking. In the cotton armyworm Spodoptera littoralis, an insect pest model, analysis of an expressed sequence tag collection from antenna, the olfactory organ, has allowed identifying a maspardin homolog (SlMasp). We have investigated SlMasp tissue distribution and temporal expression by PCR and in situ hybridization techniques. Noteworthy, we found that maspardin was highly expressed in antennae and associated with the structures specialized in odorant detection. We have, in addition, identified maspardin sequences in numerous “nonmammalian” species and described here their phylogenetic analysis in the context of metazoan diversity. We observed a strong conservation of maspardin in metazoans, with surprisingly two independent losses of this gene in two relatively distant ecdysozoan taxa that include major model organisms, i.e., dipterans and nematodes.     

Bright photophase accelerates re-entrainment after experimental jetlag in Drosophila

The efficacy of bright photophase (BP) in accelerating the re-entrainment of Drosophila biarmipes rhythm following 8?h phase advance and delay of light–dark (LD) cycle was examined by subjecting the flies to 24?h LD cycles with dim photophase (DP) at 30?lx and BP at 300?lx. Re-entrainment was analysed by using the activity onset, activity offset and the duration of activity. Following LD advance or delay, the BP flies re-entrained faster than the DP flies which was attributed to the enhanced zeitgeber strength of BP. Nevertheless, the re-entrainment was a protracted process even in the BP flies since the activity offsets underwent more transients than the activity onsets. Thus, this study demonstrates that the BP accelerates the re-entrainment in D. biarmipes. It, however, also reveals that the re-entrainment is a prolonged process when the activity onset and offset are regarded as the rhythm markers.     

The oral cone of Anomalocaris is not a classic ‘‘peytoia’’

The Cambro-Ordovician anomalocaridids are large ecdysozoans commonly regarded as ancestors of the arthropods and apex predators. Predation is indicated partly by the presence of an unusual “peytoia”-type oral cone, which is a tetraradial outer ring of 32 plates, four of which are enlarged and in perpendicular arrangement. This oral cone morphology was considered a highly consistent and defining characteristic of well-known Burgess Shale taxa. It is here shown that Anomalocaris has a different oral cone, with only three large plates and a variable number of smaller and medium plates. Its functional morphology suggests that suction, rather than biting, was used for food ingestion, and that anomalocaridids in general employed a range of different scavenging and predatory feeding strategies. Removing anomalocaridids from the position of highly specialized trilobite predators forces a reconsideration of the ecological structure of the earliest marine animal communities in the Cambrian.